Thursday, April 12, 2012

#9 Microwave oven


Objective: 
By the sacrifice of brave marshmallows we shall be able to determine the frequency of the microwave by assuming a standing wave is producing in the oven. Furthermore, a rage of microwave shall be deduced in the dimensions of microwave oven. By heating up water we can acquire the power and then decided how many photons per seconds are oscillating in the microwave and what pressure do these photons exerts.

Data recorded:
      λ= 12 cm, dimension of the oven is 23 x 35 x 35 cm3, mass of water is 100 g, heating time is 30 s, Ti is 20 ℃, Tf is 57 ℃.


Calculation:

       The wave is electromagnetic wave, thus v = c.

       c =  λf , thus f = 3 x 108 / 0.12 = 2.5 x 109 Hz
       Cwater = 4.186 J/(g℃)
Thus the energy is E = Cwater x mwater x (Tf - Ti) = 15488.2 J
P = E / t = 516.3 W
Energy of photon is Ep = h f = 6.626 x 10-34 x 2.5 x 109 = 1.65 x 10-24 J
Thus, total oscillating photon numbers are P / Ep = 3.13 x 1026
Assume power exerts evenly on the inner surface, then
Area = 2 x (0.23 x 0.35 + 0.23 x 0.35 + 0.35 x 0.35) = 0.567 m2
Intensity is I = P / A = 516.3 / 0.567 = 910.6 W/m2
I = Ppressure x c, therefore Ppressure = 910.6 / 3 x 108 = 3.04 x 106 Pa

#8 Concave and convex mirrors


Objective: 
Give a qualitative observation of the image formed by both convex and concave mirrors.

Procedures:

1.      Describe the image formed by placing an object in front of a convex mirror.
2.      Move the object and describe the change of image.
3.      Repeat the process for concave mirror.

Results:

       Convex mirror:

       The image appears to be smaller and away from the center compared with object, it is not inverted. When moving towards the mirror the image grows larger and more like the original size.




 

       Diagram as shown:


do = 15 cm, ho = 10 cm, d­i = -7 cm, h­i = 5 cm.
       Agrees with observation.

       Concave mirror:
       The image appears to be much larger than the object and more close to the center, but still not inverted. When moving towards the mirror the image becomes smaller while moving away from the mirror the image gain larger and larger and disappear then become inverted.

       Diagram as shown:

      do = 20 cm, ho = 8 cm, di = 12 cm, hi = -5 cm
       The diagram shows the situation when the object is further away from the mirror, which caters to the latter description.

Discussion:
       The theoretical diagram agrees with the observation. Experiment conduct successfully.

Wednesday, April 11, 2012

#6 Length of a pipe


Objective: 
The purpose of this experiment is to measure the length of a pipe using only the property of sound and standing wave.

Procedures:

1.      Record the frequency of a swing pipe when it reaches a harmonic, that is, a standing wave is created in the pipe.
2.      Record frequency when the swing pipe reaches next harmonic frequency.
3.      Using two frequencies to calculate the length of the swing pipe.


Results:

       Assume the length remains constant and the speed of sound remains to be 340 m/s, the first ω1 = 3859 rad/s, ω2 = 5068 rad/s. Thus, as f = ω / 2 π , f1 = 614 , f2 = 810. v = fλand v = 340 m/s, λ1 =  0.56 m,λ2 = 0.42.

       L = n (0.56) / 2 = (n + 1)(0.42)/2, so n is 3.

       Thus, the length L is 0.84 m


Discussion:
       The experiment conducts well. The tricky part is to understand the first harmonic sound is not actual first standing wave created in the pipe. The calculation is easy and error may occur in rounding the numbers.

#2 Fluid dynamics:


Objective: 
Using application problem to verify Bernoulli Equation.

Procedures:

1.      Set the equipment as instructed and record all values needed.
2.      Measure time for releasing certain amount of water.
3.      Calculate the theoretical value and compare with the actual measured data.

Bernoulli Equation:

Results:
Value obtained:
       Volume emptied: 450 mL  Height of the water surface: 7.6 cm
       Height of the hole: 2.5 cm       Radius of the hole: 2.6 mm
       We stick paper to the hole and draw the shape of the hole using pencil on the other side of the bucket. The radius of the hole is roughly determined to be the value above.

       Ttheoretical  = V / (A·(2·g·h)0.5)
= 450 ·10-6 / (π·(2.6·10-3)2·(2·9.8·(0.076-0.025))0.5)
= 21.40 s
       Time measured:
      
# of run
1
2
3
4
5
6
Time / s
21.88
21.86
22.61
21.67
22.66
22.55







Average time / s:
22.205





Percent difference / %:
3.762





Theoretical hole radius / mm :
2.591







Discussion:
       The result is very close to theoretical value, proving the ideal equation works. However, by assuming the velocity of fluid is constant and water surface remains constant, the error can be created in the system. The actual data is with in 5 % of the theoretical one, the experiment conducts successfully.

#3 Mechanical wave:


Objective: 
The purpose of this experiment is to study the mechanical wave’s property, by measuring its wavelength and frequency; we can derive the speed of a wave.

Procedures:

1.      Create a steady wave. Measure the distance between two people who hold the spring.
2.      Determine the wavelength of the spring and record the period of the wave.
3.      Calculate the frequency. Set another steady wave with different distance.
4.      Repeat and record the data.

Results:
       We run three trails for each wavelength and count the time for ten periods.


Wavelength / cm
88
100
60
Average period / s
0.43
0.49
0.50
Average frequency / Hz
2.33
2.04
2.00
Product of wavelength and frequency
204.65
204.08
120.00

Discussion:
       Due to the fact that human generates this wave; the speed of the wave cannot be accurately controlled. The first two sets of data are good while the third has big difference with respect to the other two. Other factors may affect the results can be the insufficient precision in measuring both time and wavelength.

#5 Introduction to sound:


Objective: 
By using Labpro to capture the wave pattern of certain sound wave, we can further understand the property of sound.

Procedures:

1.      Say AAAAA steadily to the microphone while recording, and make sure the graph is in clear pattern.
2.      Let a different team member to say AAAAA again and record the pattern, compare with previous one.
3.      Collect data from a tuning fork by stinking it on a soft object. Compare with previous two.
4.      Measure the hair by using micrometer and compare with the calculated hair thickness.

Results:
       Values collected and calculated as shown:

Collecting
time / s
Patterns
On the
screen
Period / s
Frequ
-ency
/ Hz
Wave
-length
/ m
Amplitude

Theoretical
Frequency
of fork
First
Person
0.03
3
0.01000
100
3.40
0.40

384 Hz
Second
Person
0.03
8.5
0.00353
283
1.20
0.25

Speed of sound
Tuning
Fork
0.03
11.5
0.00261
383
0.89
0.20

340 m/s
       The experimental frequency of the tuning fork is close to the theoretical one, thus the data is good. For different people saying AAAAA, the pattern dose not change while both the frequency and amplitude change. Also, by striking tuning fork lighter, the pattern and frequency of the sound wave produced does not change while the amplitude changed.
       Pattern for human voice of AAAA:
       
       Pattern for tuning fork:
       
Discussion:
       The experiment came with good data. By investigating the pattern, we found that certain sound of language may be carried in different loudness or frequency, but they will be in same pattern.

#10 Measuing a human hair:


Objective: 
By applying the diffraction of light, measuring small thickness is feasible. The object is to measure the thickness of human hair and use micrometer to verify the measurement.

Procedures:

1.      Make a hole in a card and tape a single human hair across the hole and keep the hair taut.
2.      Stabilize the card so that the card is parallel to the whiteboard.
3.      Obtain the wavelength of the laser, and then point the laser perpendicular to the whiteboard while shinning through the hair. Record the distance from the card to the wall and the distance between nearest bright point to the central diffraction.
4.      Measure the hair by using micrometer and compare with the calculated hair thickness.

Results:
Value obtained:
Distance from the card to the board (L): 110 cm      Wavelength: 632.8 nm
Distance from the first bright point to the center (y): 0.16 cm
Thus, thickness is:



D = 2.18 x 10-4 m


Measured value from micrometer:
Percent difference:
Because of time and equipment limitation and missing lab partner, we were unable to measure the hair thickness by micrometer, thus I decided to search on the Internet about the usual human hair thickness.


Discussion:
       The error may results from imprecise measurement from the meter stick. As searched on the Internet, the human hair usually lands in 5~8 x 10-5 m, thus the experiment are not conducted so well.